Display IS-IS Area Configuration

About this task

Perform this procedure to display the IS-IS area configuration on the switch.

1. To enter User EXEC mode, log on to the switch.
2. Display IS-IS area configuration:

   show isis area

Example

Displaying IS-IS area configuration:

Switch:1>show isis area
====================================================================================
                                           ISIS Area Address
====================================================================================

ADDRESS                             ORIGIN   AREA-ROLE  AREA-NAME
------------------------------------------------------------------------------------
10.10.10.11                         config   HOME       v49_1
10.10.10.21                         config   REMOTE     v49_2
------------------------------------------------------------------------------------