Display IS-IS Area Virtual Node Configuration

About this task

Perform this procedure to display the IS-IS area virtual node configuration on the switch.

1. To enter User EXEC mode, log on to the switch.
2. Display IS-IS area virtual node configuration:

   show isis area-vnode

Example

Displaying IS-IS area virtual node configuration:

Switch:1>show isis area-vnode
=================================================================================================
                                     ISIS SPBM Multi-Area VNode Info
=================================================================================================
VNODE             VNODE         VNODE                            REPRESENTED    REPRESENTED VNODE
SYSTEM-ID         NICK-NAME     HOST-NAME       AREA-ADDRESS     AREA           USED-IN-AREA
-------------------------------------------------------------------------------------------------
9200.30ff.fff0    9.00.30       area-9.00.30    49.0030          HOME           REMOTE
9200.50ff.fff0    9.00.50       area-9.00.50    49.0050          REMOTE         HOME