Viewing the OSPF authentication information

Display OSPF authentication information to ensure accuracy.

Procedure

Enter Privileged EXEC mode:

enable
View the OSPF authentication information:

show ip ospf int—auth [vrf WORD<1-16>] [vrfids WORD<0-512>]

Example

View the OSPF authentication information:

Switch:1#show ip ospf int-auth

================================================================================
                     OSPF Interface AuthKey - GlobalRouter
================================================================================
INTERFACE       AUTHTYPE AUTHKEY
--------------------------------------------------------------------------------
192.0.2.1       none
192.0.2.11      none
192.0.2.3       none

Variable definitions

The following table defines parameters for the show ip ospf int-auth command.


Variable	Value
vrf WORD<1-16>	Specifies a VRF by name.
vrfids WORD<0-512>	Specifies a range of VRF IDs.