show sys control

Shows system control settings.

Syntax

Default

None

Command Mode

User EXEC

Command Output

The show sys control command displays the following information:

Output field

Description

tcp-timestamp

Displays if the timestamp is enabled or disabled.

tcp-keepalive-time

Displays the value of the TCP keepalive time in seconds.

tcp-keepalive-interval

Displays the value of the TCP keepalive interval, in seconds.

tcp-keepalive-probes

Displays the value for the TCP keepalive probes.

mac-move-protection

Displays if MAC move protection is enabled or disabled for the Virtual-IST (vIST).

Example

The following example displays output from the show sys control command.

Switch:1>show sys control
==========================================================================================
                            System Control Settings
==========================================================================================
                 tcp-timestamp : disable
            tcp-keepalive-time : 120
        tcp-keepalive-interval : 60
          tcp-keepalive-probes : 15
           mac-move-protection : on