filter acl port

Associate ports with, or remove ports from, an ACL so that filters do or do not apply to port traffic, respectively.


Command Parameters

{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.


Specifies the ACL ID. Use the CLI Help to see the available range for the switch.



Command Mode

Global Configuration