clear eapol non-eap

Clears the Non-EAP session that is learned on the switch.


Command Parameters

{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}
Specifies the port list on which the Non-EAP MAC is learnt.

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Specifies the MAC-Address on the Non-EAP session.



Command Mode

Privileged EXEC