ike v2-profile

Use this command to configure an IKE Phase 2 profile.


Command Parameters

dh-group <modp768|modp1024|modp2048|any
Specifies the Diffie-Hellman (DH) group. DH groups categorize the key used in the key exchange process, by its strength. The key from a higher group number is more secure. The default value is modp2048.
encrypt-algo <desCbc|3DesCbc|aesCbc|any>
Specifies the type of encryption algorithm. The default value is aesCbc.
encrypt-key-len <128|192|256>
Specifies the length of the encryption key. The default is 256.
hash-algo <md5|sha|sha256|any>
Specifies the type of hash algorithm. The default value is sha256.
integrity-algo <hmac-md5|hmac-sha|hmacsha256|aes-xcbc|any>
Specifies the type of integrity algorithm. The default is sha256.
lifetime-sec <0-4294967295>
Specifies the lifetime value in seconds. The lifetime ensures that the peers renegotiate the SAs just before the expiry of the lifetime value, to ensure that Security Associations are not compromised. The default value is 86400 seconds.
Specifies the IKE v2–profile name.



Command Mode

Global Configuration