ip ospf area range (for a VRF)

Use aggregate area ranges to reduce the number of link-state advertisements that are required within the area. You can also control advertisements.


Command Parameters

{A.B.C.D} {A.B.C.D/X}
<A.B.C.D> identifies an OSPF area and <A.B.C.DX> is the IP address and subnet mask of the range, respectively.
Specifies the LSA type. If you configure the range as type nssaextlink then you cannot configure the advertise-metric.
advertise-metric <0-65535>
Changes the advertised metric cost of the OSPF area range.
advertise-mode <summarize|suppress|nosummarize
Changes the advertisement mode of the range.



Command Mode

VRF Router Configuration