channelize

Enable port channelization. Use this feature to configure a single port to operate as four logical interfaces.

Note

Not all hardware platforms support this feature. For information about hardware support, see your hardware documentation.

Syntax

channelize enable
channelize port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} enable
default channelize enable
default channelize port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} enable
no channelize enable
no channelize port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} enable

enable: Enable channelization for all ports.
port {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}: Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

None

GigabitEthernet Interface Configuration