ipv6 interface link-local (for a port)

Create a link-local address for the port.


Command Parameters

address WORD<0-46>
Specifies the IPv6 address.
Enables route advertisement.
mac-offset <MAC-offset>

Specifies a number by which to offset the MAC address from the chassis MAC address. This ensures that each IP address has a different MAC address. If you omit this variable, a unique MAC offset is automatically generated. Different hardware platforms support different ranges. To see which range is available on the switch, use the CLI command completion Help.

name WORD<0-255>
Assigns a descriptive name. The network management system also configures this string.
vlan <1-4059>

Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. On switches that support the vrf-scaling and spbm-config-mode boot configuration flags, if you enable these flags, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.

Specifies the 64-bit interface ID used to calculate the actual link-local address.



Command Mode

GigabitEthernet Interface Configuration