qos if-rate-limiting

Syntax

• default qos if-rate-limiting [port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}]

• no qos if-rate-limiting [port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}]

• qos if-rate-limiting [port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}] rate <1000-40000000>

Command Parameters

port {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

rate <1000-40000000>

Specifies the ingress rate limit in Kbps. The range is 1000–40000000.

Default

None

Command Mode

GigabitEthernet Interface Configuration

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine User Guide.