Display Link Layer Discovery Protocol (LLDP) transmission TLVs.
show lldp tx-tlv
None
Privileged EXEC
The show lldp tx-tlv command displays the following information:
|
Output field |
Description |
|---|---|
|
Port |
Specifies the port number. |
|
PortDesc |
Specifies the port description transmission TLV. The default is enabled. |
|
SysName |
Specifies the system capabilities transmission TLV. The default is enabled. |
|
SysDesc |
Specifies the system description transmission TLV. The default is enabled. |
|
SysCap |
Specifies the system name transmission TLV. The default is enabled. |
Switch:1(config-if)#show lldp tx-tlv
=======================================================
LLDP port tlvs
=======================================================
-------------------------------------------------------
Port PortDesc SysName SysDesc SysCap
-------------------------------------------------------
1/1 enabled enabled enabled enabled
1/2 enabled enabled enabled enabled
1/3/1 enabled enabled enabled enabled
1/3/2 enabled enabled enabled enabled
1/3/3 enabled enabled enabled enabled
1/3/4 enabled enabled enabled enabled
1/4 enabled enabled enabled enabled
1/5 enabled enabled enabled enabled
1/6 enabled enabled enabled enabled
1/7 enabled enabled enabled enabled
1/8 enabled enabled enabled enabled
1/9 enabled enabled enabled enabled
1/10 enabled enabled enabled enabled