lldp med-network-policies

Configures LLDP-MED network policies on specific ports.


Command Parameters

{guest-voice | guest-voice-signaling | softphone-voice | streaming-video | videoconferencing | video-signaling | voice | voice-signaling}
Specifies the type of LLDP-MED network policy.
dscp <0-63>
Specifies the Layer 3 DiffServ Code Point (DSCP) value, as defined in IETF RFC 2474 and RFC 2475.
priority <0-7>
Specifies the priority level, as defined in IEEE 802.1D.
tagging {tagged | untagged}
Specifies the type of VLAN tagging to apply on the selected ports.
vlan-id <0-4059>
Specifies the VLAN ID for the port, as defined in IEEE 802.1Q. If you configure priority tagged frames, the system recognizes only the 802.1D priority level and uses a value of 0 for the VLAN ID of the ingress port.



Command Mode

GigabitEthernet Interface Configuration