show ipv6 fhs snooping binding

Displays entries in the SBT.


Command Parameters

ipv6-address WORD<0-46>
Displays a specific binding entry based on its IPv6 address.
type <dynamic|static>
Displays binding entries by type.
vlan <1-4059>

Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. On switches that support the vrf-scaling and spbm-config-mode boot configuration flags, if you enable these flags, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.



Command Mode