show ip tcp adjust-mss

Displays the configuration of the TCP maximum segment size (MSS) adjustment functionality on the switch.

Syntax

Default

None.

Command Mode

User EXEC

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine Feature Support Matrix.

Command Output

The show ip tcp adjust-mss command displays the following information:

Output field

Description

ENABLE

Displays if the MSS adjustment functionality is enabled on the switch.

STATUS

Displays the activation status of the MSS adjustment functionality. The MSS adjustment functionality only activates when at least one FE tunnel with a maximum transmission unit (MTU) less than or equal to 1500 is configured.

TCP MSS TYPE

Displays if the MSS adjustment value is manually configured or auto-derived.

TCP MSS VALUE

Displays the MSS adjustment value.

Example

The following example displays the TCP MSS adjustment configuration.

Switch:1>show ip tcp adjust-mss
================================================================================
                              IP TCP Adjust MSS
================================================================================
ENABLE            STATUS            TCP MSS                   TCP MSS
                                    TYPE                      VALUE
--------------------------------------------------------------------------------
TRUE              ACTIVE            MANUAL-CONFIG             1200