accept adv-rtr (for OSPF)

Use a route policy to define how the switch Redistribute external routes from a specified source into an OSPF domain. The policy defines which route types the switch accepts and Redistribute.


Command Parameters

Specifies the IP address.
Enables an OSPF accept entry for a specified advertising router.
metric-type <type1|type2|any>
Indicates the OSPF external type. This parameter describes which types of OSPF external routes match this entry. any means match all external routes. type1 means match external type 1 only. type2 means match external type 2 only.
route-map WORD<0-64>
Specifies the name of the route policy to use for filtering external routes advertised by the specified advertising router before accepting into the routing table.



Command Mode

OSPF Router Configuration