speed

Configure the speed of the port on the Ethernet modules.
Note

Note

Not all parameters appear on all hardware platforms.

Syntax

Command Parameters

<10|100|1000|10000|2500|25000|5000>
Specifies the port speed.
{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

None

Command Mode

GigabitEthernet Interface Configuration