show endpoint-tracking interfaces

Display the status of Endpoint Tracking on interfaces. Only interfaces on which Endpoint Tracking has been created are shown.

Syntax

Command Parameters

gigabitethernet {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

mlt <1-512>
Specifies the MLT ID.

Default

None

Command Mode

User EXEC

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine Feature Support Matrix.

Command Output

The show endpoint-tracking interfaces command displays the following information:

Output field

Description

PORT NUM

Specifies the slot and port number, or the MLT ID.

INDEX

Specifies the interface index of the port or MLT.

STATUS

Specifies whether Endpoint Tracking is enabled or disabled on the port or MLT. Disabled specifies that Endpoint Tracking has been created but not enabled, and Enabled specifies that Endpoint Tracking has been created and enabled.

Example

The following example displays the Endpoint Tracking status of ports and MLT interfaces. In this example, two ports have Endpoint Tracking created and enabled, one MLT has Endpoint Tracking created and enabled, and one MLT has Endpoint Tracking created but not yet enabled.

Switch:1>show endpoint-tracking interfaces
========================================================================================== 
                                 Endpoint Tracking Interfaces 
==========================================================================================
PORT 
NUM      INDEX      STATUS
------------------------------------------------------------------------------------------ 
1/1        192      Enabled
1/10       201      Enabled
MLT-2      6145     Enabled
MLT-5      6148     Disabled
-------------------------------------------------------------------------------- 
4 out of 4 Total Num of Endpoint Tracking interfaces displayed 
--------------------------------------------------------------------------------