show isis logical-interface

Display IS-IS logical interfaces.

Syntax

Command Parameters

name
Displays IS-IS logical interface name.

Default

The default is non.

Command Mode

User EXEC

Command Output

The show isis logical-interface command displays the following information:

Output field

Description

BFD STATUS

Specifies the status of BFD on this logical interface. The status can be enabled or disabled.

IFIDX

Specifies an index value for this logical interface.

NAME

Specifies the administratively assigned name of this logical interface, which can be up to 16 characters.

ENCAP TYPE

Specifies whether the encapsulation type for the logical interface is Layer 2 (L2–P2P-VID) or Layer 3 (IP).

L2_INFO

PORT/MLT

Specifies the port or MLT that the logical interface is connected to in an Layer 2 network.

L2_INFO

VLAN

Specifies the list of VLANs that are associated with this Layer 2 logical interface.

TUNNEL DEST-IP

Specifies the destination IP address for the logical interface.

L3_TUNNEL_NEXT_HOP_INFO

PORT/MLT

Specifies the outgoing interface (port or MLT) for VXLAN traffic.

L3_TUNNEL_NEXT_HOP_INFO

VLAN

Specifies the outgoing VLAN interface for VXLAN traffic.

L3_TUNNEL_NEXT_HOP_INFO

VRF

Specifies the name of the VRF that this Layer 3 logical interface is configured on.