sys msg-control

Configure system message control to suppress duplicate error messages on the console and to determine the action to take if they occur.


Command Parameters

action <both|send-trap| suppress-msg>
Configures the message control action. You can either suppress the message or send a trap notification, or both. The default is suppress-msg.
control-interval <1-30>
Configures the message control interval in minutes. The default control-interval is 5.
max-msg-num <2-500>
Configures the number of occurrences of a message after which the control action occurs. The default is 5 messages.



Command Mode

Global Configuration