lldp tx-tlv med

Configure organization-specific TLVs for Link Layer Discovery Protocol-Media Endpoint Discovery (LLDP-MED).


Command Parameters


Enables advanced power management between an LLDP-MED network connectivity and endpoint devices. The TLV enables the advertisement of fine grained power requirement details, endpoint power priority, and power status for network connectivity and endpoint devices.

The default is enabled for devices that support PoE.


Specifies tracking and identification of inventory-related attributes for endpoint devices.

The default is enabled.


Enables the network connectivity devices to advertise location information, including emergency call service location for communication endpoint devices.

The default is enabled.


Enables a network element to determine if connected devices support LLDP-MED

The default is enabled.


Enables network connectivity and endpoint devices advertise VLAN information, Layer 2, and Layer 3 priorities associated with a specific set of applications on a port. An LLDP-MED endpoint advertises this TLV for supported application types to enable the discovery of specific policy information and the diagnosis of network policy configuration mismatch issues.

The default is enabled.


The default is enabled.

Command Mode

GigabitEthernet Interface Configuration