ipv6 interface retransmit-timer (for the
management port)
Configure the time, between retransmissions of Neighbor Solicitation messages to a neighbor
when resolving the address or when probing the reachability of a neighbor.
Note
This command does not apply to all hardware platforms.
Command Parameters
- <0-3600000>
- Configures the time, in
milliseconds, between retransmissions of Neighbor Solicitation messages to a
neighbor when resolving the address or when probing the reachability of a
neighbor.
Default
The default is 1000.
Command Mode
mgmtEthernet Interface Configuration
Usage Guidelines
This command is not supported on 5320 Series.
