Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

service

Use the service command to enable or disable an AeroScout, Ekahau, or Centrak location-based service on the Wireless Appliance. The service command is accessible from the lbs context of the CLI.

service disable | aeroscout | ekahau | centrak

Parameters

disable Disables location-based service.
aeroscout Enables Aeroscout location-based service.
ekahau Enables Ekahau location-based service.
centrak Enables Centrak location-based service.

Usage

After enabling the location based service using the service command, specify the IP address, port, and multicast address with the respective commands.
  • Enter the IP address of the location based service server.
  • Centrak and Ekahau configuration offer a default port number and multicast address, but you can modify the default values if necessary.

Now assign APs to participate in the location-based service.

For more information, see lbs-status.

Examples

The following example enables the Centrak location-based service:

EWC.extremenetworks.com# lbs
EWC.extremenetworks.com:lbs# service centrak

Related Topics

server-ip
port
multicast
lbs-status
Published May 2018prev | next

Email this topicEmail this topic

Print this pagePrint this page