Use the show policy command to display configuration information for all polices configured on the Wireless Appliance.
The following example displays configuration information about all configured policies:
EWC.extremenetworks.com# show policy
Policy Name Topology Ingress rate Egress rate Mode Filter defined
profile profile
open Seg1_Routed no-change no-change routed Yes
unAuth Seg2_Routed no-change no-change routed Yes
Auth Seg2_Routed no-change no-change routed Yes
BAC Bridged at AP no-change no-change b@ap Yes
untagged
Print
this page
Email this topic
Feedback