Ping

Use the Ping page to tell the switch to send a ping request to a specified IP address. You can use this feature to check whether the switch can communicate with a particular network host.

To access this page, click System > Utilities > Ping in the navigation menu.

Click to expand in new window

Ping Fields

Field Description
Hostname/IP Address Enter the IP address or the host name of the station you want the switch to ping. The initial value is blank. This information is not retained across a power cycle.
Count The number of ICMP (Internet Control Message Protocol) echo request packets to send to the host.
Interval The number of Seconds to wait between sending ping packets.
Size The size of the ping packet, in bytes. Changing the size allows you to troubleshoot connectivity issues with a variety of packet sizes, such as large or very large packets.
Source The source IP address or interface to use when sending the echo request packets. If source is not required, select None as source option.
IP Address The source IP address to use when sending the Echo requests packets. This field is enabled when IP Address is selected as source option.
Interface The interface to use when sending the Echo requests packets. This field is enabled when Interface is selected as source option.
Status Displays the results of the ping.
Results The results of the ping test, which includes information about the reply (if any) received from the host.
Start (Button) Starts the ping test. The device sends the specified number of ping packets to the host.
Stop (Button) Interrupts the current ping test.