Multicast Router Configuration

If a multicast router is attached to the switch, its existence can be learned dynamically. You can also statically configure a switch port as a multicast router interface. Use the IGMP Snooping Multicast Router Configuration page to manually configure an interface as a static multicast router interface.

To access this page, click Switching > IGMP Snooping > Multicast Router Configuration in the navigation menu.

Click to expand in new window

Multicast Router Configuration Fields

Field Description
Interface Select the physical or LAG (Link Aggregation Group) interface to display.
Multicast Router Set the multicast router status:
  • Enabled: The port is a multicast router interface.
  • Disabled: The port does not have a multicast router configured.

If you change any of the parameters, click Submit to apply the changes to the system. If you want the switch to retain the new values across a power cycle, you must save the configuration.