Use the IGMP Snooping Interface Configuration page to configure IGMP (Internet Group Management Protocol) snooping settings on specific interfaces.
To access this page, click
in the navigation menu.Field | Description |
---|---|
Interface | Select the physical or LAG (Link Aggregation Group) interfaces to configure. |
Admin Mode | Select the interface mode for the selected interface for IGMP Snooping for the switch from the drop-down menu. The default is disable. |
Group Membership Interval | Specify the amount of time you want the switch to wait for a report for a particular group on a particular interface before it deletes that interface from the group. The valid range is 2 to 3600 seconds. The default is 260 seconds. |
Max Response Time | Specify the amount of time you want the switch to wait after sending a query on an interface because it did not receive a report for a particular group on that interface. Enter a value greater or equal to 1 and less than the Group Membership Interval in seconds. The default is 10 seconds. The configured value must be less than the Group Membership Interval. |
Multicast Router Present Expiration Time | Specify the amount of time you want the switch to wait to receive a query on an interface before removing it from the list of interfaces with multicast routers attached. Enter a value between 0 and 3600 seconds. The default is 0 seconds, indicating an infinite timeout or no expiration. |
Fast Leave Admin Mode | Select the Fast Leave mode for the a particular interface from the drop-down menu. The default is Disable. |
If you make any changes on the page, click Submit to apply the new settings to the switch.