VLAN Status

Use the IGMP Snooping Querier VLAN Status page to view information about the IGMP (Internet Group Management Protocol) snooping querier status for all VLANs that have the snooping querier enabled.

To access this page, click Switching > IGMP Snooping Querier > VLAN Status in the navigation menu.

IGMP Snooping Querier VLAN Configuration Fields

Field	Description
VLAN ID	The VLAN associated with the rest of the data in the row. The table includes only VLANs that have the snooping querier enabled.
State	The operational state of the IGMP snooping querier on the VLAN, which is one of the following: Querier: The snooping switch is the querier in the VLAN. The snooping switch will send out periodic queries with a time interval equal to the configured querier query interval. If the snooping switch sees a better querier (numerically lower) in the VLAN, it moves to non-querier mode. Non-Querier: The snooping switch is in non-querier mode in the VLAN. If the querier expiry interval timer expires, the snooping switch moves into querier mode. Disabled: The snooping querier is not operational on the VLAN. The snooping querier moves to the disabled mode when IGMP snooping is not operational on the VLAN, when the querier address is not configured, or the network management address is not configured.
Version	The operational IGMP protocol version of the querier.
Last IP Address	The IP address of the last querier from which a query was snooped on the VLAN.
Last Version	The IGMP protocol version of the last querier from which a query was snooped on the VLAN.
Max Response Time (Seconds)	The maximum response time to be used in the queries that are sent by the snooping querier.