Multicast Router VLAN Status

Use the Multicast Router VLAN Status page to enable or disable specific VLANs as static multicast router interfaces for a physical port or LAG (Link Aggregation Group) and to view the multicast router VLAN status for each interface. A multicast router interface faces a multicast router or MLD querier and receives multicast traffic. If a multicast router is attached to the switch, its existence can be learned dynamically. You can also statically configure one or more VLANs on each interface to act as multicast router interfaces.

To access this page, click Switching > MLD Snooping > Multicast Router VLAN Status in the navigation menu.

Use the buttons to perform the following tasks:

To enable one or more VLANs as multicast router interfaces on a port or LAG, click Add and configure the settings in the available fields.
To change the VLANs that are enabled as multicast router interfaces for a port or LAG, select the entry with the settings to change and click Edit.
To disable all VLAN multicast routing interfaces for a port or LAG, select each entry to modify and click Remove. You must confirm the action.

MLD Snooping Multicast Router VLAN Status Fields

Field	Description
Interface	The interface associated with the rest of the data in the row. Only interfaces that are configured with multicast router VLANs appear in the table. When adding multicast router VLAN information for an interface, use the Interface menu to select the interface on which to enable one or more multicast router VLAN interfaces. When editing multicast router VLAN information, this field shows the interface that is being configured.
VLAN IDs	The ID of each VLAN configured as enabled as a multicast router interface on the associated interface. When changing the multicast routing VLAN interfaces that are associated with an interface, click the VLAN ID to select it (or [Ctrl] + click to select multiple VLAN IDs).

Field

Description

Interface

The interface associated with the rest of the data in the row. Only interfaces that are configured with multicast router VLANs appear in the table. When adding multicast router VLAN information for an interface, use the Interface menu to select the interface on which to enable one or more multicast router VLAN interfaces. When editing multicast router VLAN information, this field shows the interface that is being configured.

VLAN IDs

The ID of each VLAN configured as enabled as a multicast router interface on the associated interface. When changing the multicast routing VLAN interfaces that are associated with an interface, click the VLAN ID to select it (or [Ctrl] + click to select multiple VLAN IDs).