Use the IGMP Snooping Querier VLAN Configuration page to enable the snooping querier feature on one or more VLANs and to configure per-VLAN IGMP (Internet Group Management Protocol) snooping querier settings. Only VLANs that have the IGMP snooping querier feature enabled appear in the table.
To access this page, click
in the navigation menu.Use the buttons to perform the following tasks:
Field | Description |
---|---|
VLAN ID | The VLAN on which the IGMP snooping querier is enabled. When enabling the IGMP snooping querier on a VLAN, use this menu to select the desired VLAN. Only VLANs that have been configured on the system and are not already enabled for the IGMP snooping querier appear in the menu. When modifying IGMP snooping querier settings, this field identifies the VLAN that is being configured. |
Querier Election Participation | The participation mode for the IGMP snooping querier
election process:
|
Querier VLAN IP Address | The IGMP snooping querier address the VLAN uses as the source IP address in periodic IGMP queries sent on the VLAN. If this value is not configured, the VLAN uses the global IGMP snooping querier IP address. |
Click Refresh to refresh the page with the most current data from the switch.