Use the MLD Snooping Querier VLAN Configuration page to enable the MLD snooping querier feature on one or more VLANs and to configure per-VLAN MLD snooping querier settings. Only VLANS that have the MLD snooping querier feature enabled appear in the table.
To access this page, click
in the navigation menu.Use the buttons to perform the following tasks:
Field | Description |
---|---|
VLAN ID | The VLAN on which the MLD snooping querier is enabled. When enabling the MLD snooping querier on a VLAN, use this menu to select the desired VLAN. Only VLANs that have been configured on the system and are not already enabled for the MLD snooping querier appear in the menu. When modifying MLD snooping querier settings, this field identifies the VLAN that is being configured. |
Querier Election Participation | The participation mode for the MLD snooping querier
election process:
|
Querier VLAN IPv6 Address | The MLD snooping querier unicast link-local IPv6 address the VLAN uses as the source address in periodic MLD queries sent on the VLAN. If this value is not configured, the VLAN uses the global MLD snooping querier IPv6 address. |
Click Refresh to refresh the page with the most current data from the switch.