CPU Traffic Filter Global Configuration

Use the CPU Traffic Filter Global Configuration page to view and modify the CPU Traffic Filter settings on the device.

To access this page, click System > Advanced Configuration > CPU Traffic Filter > Global in the navigation menu.

Click to expand in new window

CPU Traffic Filter Global Configuration Fields

Field Description
Admin Mode Enables CPU-traffic mode. The packets in the Tx (transmitted) and Rx (received) directions are matched when the mode is enabled. The default value is disabled.
CPU Trace Mode Enables CPU packet tracing. The packet may be received by multiple components. If CPU packet tracing is enabled and tracing is configured, then the packets are traced according to the defined filter.

If you change any of the parameters, click Submit to apply the changes to the system. If you want the switch to retain the new values across a power cycle, you must save the configuration.

Click Refresh to refresh the page with the most current data from the switch.