SNTP Server Configuration

Use the SNTP Server Configuration page to view and modify information for adding and modifying SNTP (Simple Network Time Protocol) servers.

To display this page, click System > Advanced Configuration > SNTP > Server Configuration in the navigation menu.

SNTP Server Configuration Fields

Field	Description
SNTP Server	Select the IP address of a user-defined SNTP server to view or modify information about an SNTP server, or select Add to configure a new SNTP server. You can define up to three SNTP servers.
Type	Select IPv4 if you entered an IPv4 address, IPv6 if you entered an IPv6 address or DNS if you entered a hostname.
Port	Enter a port number from 1 to 65535. The default is 123.
Priority	Enter a priority from 1 to 3, with 1 being the highest priority. The switch will attempt to use the highest priority server and, if it is not available, will use the next highest server.
Version	Enter the protocol version number.

To add an SNTP server, select Add from the Server list, complete the remaining fields as desired, and click Submit. The SNTP server is added, and is now reflected in the Server list. You must perform a save to retain your changes over a power cycle.
To remove an SNTP server, select the IP address of the server to remove from the Serverlist, and then click Remove. The entry is removed, and the device is updated.

Published October 2018prev | next