VLAN Port Configuration
Use the VLAN
Port Configuration page to configure a virtual LAN on a port.
To access this page,
click in the navigation menu.
VLAN Port Configuration Fields
Field |
Description |
VLAN ID |
The menu includes the VLAN ID for all VLANs configured on the device. To view or configure settings for a VLAN, be sure to select the correct VLAN from the menu. |
Interface |
Select the interface for which you want to display or configure data. Select All to set the parameters for all ports to same values. |
Status |
The current participation mode of the interface in the selected VLAN. The value of the Status field differs from the value of the Participation field only when the Participation mode is set to Auto Detect. The Status is one of the following:
- Include: The port is a member of the selected
VLAN.
- Exclude: The port is not a member of the
selected VLAN.
|
Participation |
The participation mode of the interface in the selected VLAN, which is one of the following:
- Include: The port is always a member of the
selected VLAN. This mode is equivalent to registration fixed in the IEEE
802.1Q standard.
- Exclude: The port is never a member of the
selected VLAN. This mode is equivalent to registration forbidden in the
IEEE 802.1Q standard.
- Auto Detect: The port can be dynamically
registered in the selected VLAN through GVRP. The port will not
participate in this VLAN unless it receives a GVRP request. This mode is
equivalent to registration normal in the IEEE 802.1Q standard.
|
Tagging |
The tagging behavior for all the ports in this VLAN, which is one of the following:
- Tagged: The frames transmitted in this VLAN
will include a VLAN ID tag in the Ethernet header.
- Untagged: The frames transmitted in this VLAN
will be untagged.
|
Use the buttons to perform the following tasks:
- To configure settings for one or more interfaces, select each interface to configure and click Edit. The same settings are applied to all selected interfaces.
- To apply the same settings to all interfaces, click Edit All and configure the desired settings.
- To reload the page and view the most current information, click Refresh.