Use SNMP Trap Source Interface Configuration page to specify the physical or logical interface to use as the SNMP (Simple Network Management Protocol) client source interface. When an IP address is configured on the source interface, this address is used for all SNMP communications between the local SNMP client and the remote SNMP server. The IP address of the designated source interface is used in the IP header of SNMP management protocol packets. This allows security devices, such as firewalls, to identify all source packets coming from a specific device.
To access this page, click in the navigation menu.
SNMP Trap Source Interface Configuration Fields
| Field | Description |
|---|---|
| Type | The type of interface to use as the source interface:
|
| Interface | When the selected Type is Interface, select the physical port to use as the source interface. |
| Loopback Interface | When the selected Type is Loopback, select the loopback interface to use as the source interface. |
| VLAN ID | When the selected Type is VLAN, select the VLAN to use as the source interface. The menu contains only the VLAN IDs for VLAN routing interfaces. |
| Tunnel ID | When the selected Type is Tunnel, select the tunnel interface to use as the source interface. |
If you change any of the parameters, click Submit to apply the changes to the system. If you want the switch to retain the new values across a power cycle, you must save the configuration.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB