DAI ARP ACL Configuration

Use the DAI ARP ACL Configuration page to add or remove DAI ARP ACLs.

To display this Configuration page, click Switching > Dynamic ARP Inspection > ACL Configuration in the navigation menu.

Dynamic ARP Inspection ARP ACL Configuration

Field	Description
ACL Name	The menu contains the ARP ACL names that exist on the system.
Sender IP Address	The IP address of a system that is permitted to send ARP packets. The ARP packet must match on both the Sender IP Address and Sender MAC Address values in the rule to be considered valid.
Sender MAC Address	The MAC address of a system that is permitted to send ARP packets. The ARP packet must match on both the Sender IP Address and Sender MAC Address values in the rule to be considered valid.
Remarks	One or more remarks configured for the selected ACL and associated with the rule during rule creation.

Use the buttons to perform the following tasks:

• To create an ARP ACL and configure the first rule, click Add ACL.
• To add a new rule to an existing ACL, click Add Rule and select the name of the ACL to update from the ACL Name menu. Then, configure the rule.
• To remove one or more ARP ACLs, select each entry to delete and click Remove.
• Click Refresh to refresh the page with the most current data from the switch.