Use the Time Based Flow Statistics page to define criteria for collecting time-based statistics for specific traffic flows. The statistics include a per-interface hit count based on traffic that meets the match criteria configured in a rule for the interfaces included in the rule. The hit count statistics are collected only during the specified time range. The statistics application uses the system clock for time-based reporting. Configure the system clock (manually or through SNTP (Simple Network Time Protocol)) before using the time-based statistics feature.
To access this page, click
in the navigation menu.Use the buttons to perform the following tasks:
Field | Description |
---|---|
Reporting Methods | The methods for reporting the collected statistics at
the end of every configured interval. To change the reporting methods for all
flow-based statistics rules, click the Edit icon and select one or more
methods. To reset the field to its default value, click the Reset icon. The
available reporting methods are:
|
Rule Id | The number that identifies the flow-based statistics collection rule. |
Time Range | The name of the periodic or absolute time range to use for data collection. The time range is configured by using the Time Range Summary and Time Range Entry Summary pages. The time range must be configured on the system before the time-based statistics can be collected. |
Match Conditions | The criteria a packet must meet to match the rule. |
Interfaces | The interface or interfaces on which the flow-based rule is applied. Only traffic on the specified interfaces is checked against the rule. |
After you click Add, the Time Based Flow Configuration window opens and allows you to configure a rule for traffic flow statistics. The match conditions are optional, but the rule must specify at least one match condition. The following information describes the match criteria fields that are available in this window.
Field | Description |
---|---|
Match All | Select this option to indicate that all traffic matches the rule and is counted in the statistics. This option is exclusive to all other match criteria, so if Match All is selected, no other match criteria can be configured. |
Source IP | The source IP address to match in the IPv4 packet header. |
Destination IP | The destination IP address to match in the IPv4 packet header. |
Source MAC | The source MAC address to match in the ingress frame header. |
Destination MAC | The destination MAC address to match in the ingress frame header. |
Source TCP Port | The TCP source port to match in the TCP header. |
Destination TCP Port | The TCP destination port to match in the TCP header. |
Source UDP Port | The UDP source port to match in the UDP header. |
Destination UDP Port | The UDP destination port to match in the UDP header. |