boot

Displays a device‘s boot configuration. Use this command to view the primary and secondary image details, such as Build Date, Install Date, and Version. This command also displays the current boot and next boot information.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

show boot {on <DEVICE-NAME>}

Parameters

show boot {on <DEVICE-NAME>}


boot	Displays primary and secondary image boot configuration details (build date, install date, version, and the image used to boot the current session)
on <DEVICE-NAME>	Optional. Displays a specified device's boot configuration <DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform. Note: Use the on <DEVICE-NAME> option to view a remote device's boot configuration.

Examples

ap7532-DF9A4C#show boot
--------------------------------------------------------------------------------
     IMAGE            BUILD DATE             INSTALL DATE          VERSION
--------------------------------------------------------------------------------
  Primary       05/25/2019 06:43:28     06/03/2019 15:25:22     5.9.5.0-004D
  Secondary     07/31/2019 17:14:41     08/06/2019 13:10:02     5.9.6.0-003D
--------------------------------------------------------------------------------
Current Boot       : Secondary
Next Boot          : Secondary
Software Fallback  : Enabled
ap7532-DF9A4C#

nx9500-6C8809#show boot
--------------------------------------------------------------------------------
     IMAGE            BUILD DATE             INSTALL DATE          VERSION
--------------------------------------------------------------------------------
  Primary       06/28/2019 09:31:40     07/01/2019 13:57:47     7.2.0.0-009D
  Secondary     07/31/2019 18:44:43     08/06/2019 12:04:14     5.9.6.0-003D
--------------------------------------------------------------------------------
Current Boot       : Secondary
Next Boot          : Secondary
Software Fallback  : Enabled
VM support         : Not present
nx9500-6C8809#

nx9500-6C8809#device-upgrade rf-domain WiNG5 all
In progress ....
----------------------------------------------------------------------------------------------------
      CONTROLLER        STATUS                                MESSAGE           
----------------------------------------------------------------------------------------------------
  B4-C7-99-6C-88-09    Success    WiNG5(device type-count: ap7562-1 ap8432-1 added for upgrade),
----------------------------------------------------------------------------------------------------
nx9500-6C8809#