AP360i/e Specifications

AP360i/e is an outdoor model 802.11ax access point with dual band 2×2 system-on-a-chip (SoC) radios. The "i" in AP360i indicates that the access point comes with internal antennas and the “e” in AP360e indicates that it comes with external antenna connectors. The access points feature a dual-band radio, one band-locked radio WiFi radio, one bluetooth radio, four WiFi internal or external antennas, and one Bluetooth Low Energy (BLE) antenna.

Note

The AP360e requires a minimum base firmware of WiNG 7.3.1.

Radios:
- Two 802.11ax radios (one 2×2 2.4GHz and 5GHz radio, and one 2×2 5GHz radio)
- One IoT radio (2.4GHz)
Console port: RJ45
Two Ethernet ports:
- 1×100/1000 Mbps auto-negotiation Ethernet port, RJ45
- 1×10/100/1000 Mbps auto-negotiation Ethernet port, RJ45
LEDs: Six. All LEDs will be on during reset
One rest button
Power: PoE 802.3af
Antennas:
- Four WiFi internal antennas on AP360i and four WiFi external antennas on AP360e
- One BLE internal antenna on AP360i and one BLE external antenna port on AP360e
Temperature: -40°C to +60°C (-40°F to +140°F) @ 6000 ft.
Enclosure: Plastic