no (client-identity-group-config-mode)

Removes the client identity associated with the client identity group

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

no [client-identity|load]

no client-identity <CLIENT-IDENTITY-NAME> precedence <1-10000>

no load default-fingerprints

Parameters

no client-identity <CLIENT-IDENTITY-NAME> precedence <1-10000>


no client-identity <CLIENT-IDENTITY-NAME> precedence <1-10000>	Disassociates a specified client identity from this client identity group <CLIENT-IDENTITY-NAME> – Specify the client identity name. precedence <1-10000> – Specify the above specified client identity‘s precedence value from <1-10000>. The client identity rule is applied based on its precedence value. Lower the value, higher is the precedence. Therefore, a client identity with precedence 5 gets precedence over a client identity having precedence 20.

no load default-fingerprints


no load default-fingerprints	Disables automatic loading of built-in, system-provided client identity fingerprints

Examples

nx9500-6C8809((config-client-identity-group-test)#show context
client-identity-group test
 client-identity test precedence 1
<exsw5>(config-client-identity-group-test)#

nx9500-6C8809((config-client-identity-group-test)#no client-identity test