geo-coordinates
Configures the longitude and latitude of
the RF Domain in order to fix its exact geographical location on a map. Use this command to
define the geographical area where a common set of device configurations are deployed and
managed by this RF Domain policy.
Supported on the following devices:
- Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543,
AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Syntax
geo-coordinates <-90.0000-90.0000> <-180.0000-180.0000>
Parameters
geo-coordinates <-90.0000-90.0000> <-180.0000-180.0000>
| geo-coordinates <-90.0000-90.0000> <-180.0000-180.0000> |
Configures the geo-coordinates of this RF Domain
- <-90.0000-90.0000> –
Specify the latitude from -90.0000 - 90.0000.
- -180.0000-180.0000 –
Specify the longitude from -180.0000 - 180.0000.
|
Examples
nx9500-6C8809(config-rf-domain-TechPubs)#geo-coordinates 12.971599 77.594563
nx9500-6C8809(config-rf-domain-TechPubs)#show context
rf-domain TechPubs
location Bangalore
geo-coordinates 12.9716 77.5946
timezone Asia/Calcutta
country-code in
use database-policy default
use nsight-policy AP-rfd
control-vlan 1
controller-managed
use license WEBF
nx9500-6C8809(config-rf-domain-TechPubs)#
