wireless

Displays wireless configuration information and statistics

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

show wireless [ap|bridge|client|coverage-hole-incidents|location-server|meshpoint|mint|
ml-rrm|mobility-database|radio|regulatory|rf-domain|sensor-server|unsanctioned|wips|wlan]

show wireless ap {configured|detail|load-balancing|on <DEVICE-NAME>}

show wireless ap {configured}

show wireless ap {detail} {<MAC/HOST-NAME>} {(on <DEVICE-OR-DOMAIN-NAME>)}

show wireless ap {load-balancing} {client-capability|events|neighbors} {(on <DEVICE- NAME>)}

show wireless bridge {candidate-ap|certificate|config|hosts|on|statistics}

show wireless bridge {candidate-ap} {<MAC/HOSTNAME> {<1-3>}} {(filter radio-mac <RADIO-MAC>)} 
{(on <DEVICE-OR-DOMAIN-NAME>)}

show wireless bridge {certificate} status {on <DEVICE-NAME>}

show wireless bridge {config}

show wireless bridge {hosts} {on <DEVICE-OR-DOMAIN-NAME>}

show wireless bridge {statistics} {rf|traffic} {(on <DEVICE-OR-DOMAIN-NAME>)}

show wireless client {association-history|detail|filter|include-ipv6|on <DEVICE-OR-DOMAIN-NAME>|
statistics|tspec}

show wireless client {association-history <MAC>} {on <DEVICE-OR-DOMAIN-NAME>}

show wireless client {detail <MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}

show wireless client {filter [ip|on|state|wlan]}

show wireless client {filter} {ip [<IP>|not <IP>]} {on <DEVICE-OR-DOMAIN-NAME>}

show wireless client {filter} {on <DEVICE-OR-DOMAIN-NAME>}

show wireless client {filter} {state [data-ready|not [data-ready|roaming]|roaming]} {on <DEVICE-OR-DOMAIN-NAME>}

show wireless client {filter} {wlan [<WLAN-NAME>|not <WLAN-NAME>]} {on <DEVICE-OR-DOMAIN-NAME>}

show wireless client {include-ipv6} {detail|on|filter}

show wireless client {include-ipv6} {detail <MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}

show wireless client {include-ipv6} {filter {ip|ipv6|state|wlan}}

show wireless client {statistics} {detail|on|rf|window-data}

show wireless client {statistics} {detail <MAC>|rf|window-data <MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}

show wireless client {tspec <MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}

show wireless coverage-hole-incidents [detail|on|summary]

show wireless coverage-hole-incidents detail {filter [ap <MAC/HOSTNAME>|client-mac <MAC>]|summary} {(on <DOMAIN-NAME>)}]

show wireless location-server {on <AP-NAME>}

show wireless meshpoint {config|detail|multicast|neighbor|on|path|proxy|root|security|
statistics|tree|usage-mappings}

show wireless meshpoint {config} {filter [device <DEVICE-NAME>|rf-domain <DOMAIN-NAME>]}

show wireless meshpoint {detail} {<MESHPOINT-NAME>}

show wireless meshpoint {on <DEVICE-OR-DOMAIN-NAME>}

show wireless meshpoint {multicast|path|proxy|root|security|statistics}  
[<MESHPOINT-NAME>|detail] {on <DEVICE-OR-DOMAIN-NAME>}

show wireless meshpoint neighbor [<MESHPOINT-NAME>|detail|statistics {rf}] 
{on <DEVICE-OR-DOMAIN-NAME>}

show wireless meshpoint {tree} {on <DEVICE-OR-DOMAIN-NAME>}

show wireless meshpoint {usage-mappings}

show wireless mobility-database {on <DEVICE-NAME>}

show wireless mint [client|detail|links|portal]

show wireless ml-rrm history

show wireless [client|detail] {on|portal-candidates {<DEVICE-NAME>|filter <RADIO-MAC>}|
statistics} (<DEVICE-OR-DOMAIN-NAME>)

show wireless mint links {on <DEVICE-OR-DOMAIN-NAME>}

show wireless mint portal statistics {on <DEVICE-OR-DOMAIN-NAME>}

show wireless radio {detail|on <DEVICE-OR-DOMAIN-NAME>|statistics|tspec|wlan-map}

show wireless radio {detail} {<DEVICE-NAME>|filter|on <DEVICE-OR-DOMAIN-NAME>}

show wireless radio {detail} {<DEVICE-NAME> {<1-3>|filter|on}}

show wireless radio {detail} {filter <RADIO-MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}

show wireless radio {statistics} {detail|on|rf|windows-data}

show wireless radio {statistics} {on <DEVICE-OR-DOMAIN-NAME>|rf {on <DEVICE-OR-DOMAIN-NAME>}}

show wireless radio {statistics} {detail|window-data} {<DEVICE-NAME>} {<1-3>|filter <RADIO-MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}

show wireless radio {tspec} {<DEVICE-NAME>|filter|on <DEVICE-OR-DOMAIN-NAME>|option}

show wireless radio {wlan-map} {on <DEVICE-OR-DOMAIN-NAME>}

show wireless regulatory [channel-info <WORD>|country-code <WORD>|device-type]

show wireless regulatory [channel-info <WORD>|country-code <WORD>|device-type]

show wireless regulatory device-type [ap505|ap510] <WORD>

show wireless rf-domain statistics {detail} {(on <DEVICE-OR-DOMAIN-NAME>)}

show wireless sensor-server {on <DEVICE-OR-DOMAIN-NAME>}

show wireless unsanctioned aps {detail|statistics} {(on <DEVICE-OR-DOMAIN-NAME>)}

show wireless wips [client-blacklist|event-history] {on <DEVICE-OR-DOMAIN-NAME>}

show wireless wlan {config|detail <WLAN>|on <DEVICE-OR-DOMAIN-NAME>|policy-mappings|statistics|usage-mappings}

show wireless wlan {detail <WLAN>|on <DEVICE-OR-DOMAIN-NAME>|policy-mappings|usage-mappings}

show wireless {config filter {device <DEVICE-NAME>|rf-domain <DOMAIN-NAME>}}

show wireless wlan statistics {<WLAN>|detail|traffic} {on <DEVICE-OR-DOMAIN-NAME>}

Parameters

show wireless ap {configured}


wireless	Displays wireless configuration parameters
ap	Displays managed access point information
configured	Optional. Displays configured AP information, such as name, MAC address, profile, RF Domain and adoption status.

show wireless ap {detail} {<MAC/HOST-NAME>} {(on <DEVICE-OR-DOMAIN-NAME>)}


wireless	Displays wireless configuration parameters
ap	Displays managed access point information
detail <MAC/HOST-NAME>	Optional. Displays detailed information for all APs or a specified AP <MAC/HOST-NAME> – Optional. Displays information for a specified AP. Specify the AP‘s MAC address.
on <DEVICE-OR-DOMAIN-NAME>}	The following keyword is recursive and common to the ‘detail <MAC/HOST-NAME>' parameters: on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays information on a specified device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless ap {load-balancing} {client-capability|events|neighbors} {(on <DEVICE- NAME>)}


wireless	Displays wireless configuration parameters
ap	Displays managed access point information
load-balancing {client-capability\| events\|neighbors}	Optional. Displays load balancing status. Use additional filters to view specific details. client-capability – Optional. Displays client band capability events – Optional. Displays client events neighbors – Optional. Displays neighboring clients
on <DEVICE-NAME>	The following keyword is recursive and common to the ‘client-capability', ‘events', and ‘neighbors' parameters: on <DEVICE-NAME> – Optional. Displays load balancing information, based on the parameters passed, on a specified device <DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.

show wireless bridge {candidate-ap} {<MAC/HOSTNAME> {<1-3>}} {(filter radio-mac <RADIO-MAC>)} 
{(on <DEVICE-OR-DOMAIN-NAME>)}


wireless	Displays wireless configuration statistics
bridge candidate-ap	Optional. Displays information about the candidate infrastructure access points as well as the infrastructure access point that the client-bridge radio has selected. Note: When enabled, the client-bridge radio scans its defined channels to locate the best candidate access point servicing the infrastructure WLAN.
<MAC/HOSTNAME> <1-3>	Optional. Specify the client-bridge access point‘s hostname or MAC address. Optionally append the radio interface‘s number to form client-bridge in the form of AA-BB-CC-DD-EE-FF:RX or HOSTNAME:RX. <1-3> – Optional. Radio interface index if not specified as part of mesh ID.
filter radio-mac <RADIO-MAC>	This is a recursive parameter and common to all of the above options. filter radio-mac – Optional. Provides additional filters to specifically identify the radio by its MAC address <RADIO-MAC> – Specify the radio‘s MAC address.
on <DEVICE-OR-DOMAIN-NAME>	This is a recursive parameter and common to all of the above options. on <DEVICE-OR-DOMAIN-NAME> – Optional. Executes the command on a specified device or devices within a specified RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the AP, controller, service platform, or RF Domain name.

show wireless bridge {certificate} status {on <DEVICE-NAME>}


wireless	Displays wireless configuration statistics
bridge certificate status	Optional. Displays all client bridges in configuration and the status of their PKCS#12 certificates
on <DEVICE-NAME>	Optional. Executes the command on a specified device <DEVICE-NAME> – Specify the AP, controller, service platform name.

show wireless bridge {config}


wireless	Displays wireless configuration statistics
bridge config	Optional. Displays all client bridges in configuration The output displays the configured client-bridges‘ hostname, MAC address, profile, RF Domain, SSID, band, encryption, authentication, and EAP username.

show wireless bridge {hosts} {on <DEVICE-OR-DOMAIN-NAME>}


wireless	Displays wireless configuration statistics
bridge hosts	Optional. Displays the client bridge host information The output displays the configured client-bridges‘ host‘s MAC Address, bridge MAC address, IPv4 address, bridging status, and activity. Note: The HOST MAC column displays real MAC addresses of wired hosts, while the BRIDGE MAC column displays the translated MAC addresses. The BRIDGE MAC column is based on the radio 2 base MAC address and increments by 1 for each wired host connected to the client bridges Ge1 port.
on <DEVICE-OR-DOMAIN-NAME>	Optional. Executes the command on a specified device or devices within a specified RF Domain. <DEVICE-OR-DOMAIN-NAME> – Optional. Specify the AP, controller, service platform, or Domain name.

show wireless bridge {statistics} {rf|traffic} {(on <DEVICE-OR-DOMAIN-NAME>)}


wireless	Displays wireless configuration statistics
bridge statistics	Optional. Displays the client-bridge related statistics
rf	Optional. Displays the client-bridge related RF statistics The output displays the signal, noise, SNR, TX/RX rates, retries, and errors.
traffic	Optional. Displays the client-bridge related traffic statistics The output displays TX/RX bytes, TX/RX packets, TX/RX bits/second, and dropped packets.
on <DEVICE-OR-DOMAIN-NAME>	Optional. Executes the command on a specified device or devices within a specified RF Domain on <DEVICE-OR-DOMAIN-NAME> – Optional. Specify the AP, controller, service platform, or Domain name.

show wireless client {association-history <MAC>} {on <DEVICE-OR-DOMAIN-NAME>}


wireless	Displays wireless configuration parameters
client	Displays client information based on the parameters passed
association-history <MAC>	Optional. Displays association history for a specified client <MAC> – Specify the MAC address of the client.
on <DEVICE-OR-DOMAIN-NAME>	Optional. Displays association history on a specified device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless client {detail <MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}


wireless	Displays wireless configuration parameters
client	Displays client information based on the parameters passed
detail <MAC>	Optional. Displays detailed wireless client(s) information <MAC> – Optional. Displays detailed information for a specified wireless client. Specify the MAC address of the client.
on <DEVICE-OR-DOMAIN-NAME>	The following keyword is recursive and common to the ‘detail <MAC>' parameter: on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays detailed information on a specified device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless client {filter ip [<IP>|not <IP>]} {on <DEVICE-OR-DOMAIN-NAME>}


wireless	Displays wireless configuration parameters
client	Displays client information based on the parameters passed
filter IP [<IP>\|not <IP>]	Optional. Uses IP addresses to filter wireless clients <IP> – Selects clients with IP address matching the <IP> parameter not <IP> – Inverts the match selection
on <DEVICE-OR-DOMAIN-NAME>	The following keyword is common to the ‘IP' and ‘not IP' parameters: on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays selected wireless client information on a specified device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless client {filter} {state [data-ready|not [data-ready|roaming]|roaming]} {on <DEVICE-OR-DOMAIN-NAME>}


wireless	Displays wireless configuration parameters
client	Displays client information based on the parameters passed
filter state [data-ready\| not [data-ready\| roaming]\| roaming]	Optional. Filters clients based on their state data-ready – Selects wireless clients in the data-ready state not [data-ready\|roaming] – Inverts match selection. Selects wireless clients neither ready nor roaming Roaming – Selects roaming clients
on <DEVICE-OR-DOMAIN-NAME>	The following keyword is common to the ‘ready', ‘not', and ‘roaming' parameters: on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays selected client details on a specified device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless client {filter} {wlan [<WLAN-NAME>|not <WLAN-NAME>]} {on <DEVICE-OR-DOMAIN-NAME>}


wireless	Displays wireless configuration parameters
client	Displays client information based on the parameters passed
filter wlan [<WLAN-NAME>\| not <WLAN-NAME>]	Optional. Filters clients on a specified WLAN <WLAN-NAME> – Specify the WLAN name. not <WLAN-NAME> – Inverts the match selection
on <DEVICE-OR-DOMAIN-NAME>	The following keyword is common to the ‘WLAN and ‘not' parameters: on <DEVICE-OR-DOMAIN-NAME> – Optional. Filters clients on a specified device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless client {statistics} {detail <MAC>|rf|window-data <MAC>} 
{(on <DEVICE-OR-DOMAIN-NAME>)}


wireless	Displays wireless configuration parameters
client	Displays client information based on the parameters passed
statistics {detail <MAC>\|rf\| window-data <MAC>}	Optional. Displays detailed client statistics. Use additional filters to view specific details. detail <MAC> – Optional. Displays detailed client statistics <MAC> – Optional. Displays detailed statistics for a specified client. Specify the client's MAC address. rf – Optional. Displays detailed RF statistics on a specified device or RF Domain window-data <MAC> – Optional. Displays historical data, for a specified client <MAC> – Optional. Specify the client's MAC address
on <DEVICE-OR-DOMAIN-NAME>	The following keyword is recursive and common to the ‘detail <MAC>', ‘RF', and ‘window-data <MAC>' parameters: on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays client statistics, based on the parameters passed, on a specified device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless client {tspec} {<MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}


wireless	Displays wireless configuration parameters
client	Displays client information based on the parameters passed
tspec <MAC>	Optional. Displays detailed TSPEC (traffic specification) information for all clients or a specified client <MAC> – Optional. Displays detailed TSPEC information for a specified client. Specify the MAC address of the client.
on <DEVICE-OR-DOMAIN- NAME>	The following keyword is recursive and common to the ‘tspec <MAC>' parameter: on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays detailed TSPEC information for wireless clients on a specified device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless client {include-ipv6} {detail <MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}


wireless	Displays wireless configuration parameters
client	Displays client information based on the parameters passed
include-ipv6	Includes IPv6 address (if known) of wireless clients
detail <MAC>	Optional. Displays detailed wireless client(s) information <MAC> – Optional. Displays detailed information for a specified wireless client. Specify the MAC address of the client.
on <DEVICE-OR-DOMAIN-NAME>	The following keyword is recursive and common to the ‘detail <MAC>‘ parameter: on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays detailed information on a specified device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless client {include-ipv6} {filter {ip|ipv6|state|wlan}}


wireless	Displays wireless configuration parameters
client	Displays wireless client information based on the parameters passed
include-ipv6 {filter}	Optional. Includes IPv6 address (if known) of wireless clients filter – Optional. Defines additional filters. Use one of the following options to filter clients: ip, ipv6, state, and wlan. By default the system only displays the IPv4 address of clients. The include-ipv6 parameter includes the known IPv6 address of each client.
ip [<IPv4>\|not <IPv4>]	Optional. Displays wireless client information based on the IPv4 address passed <IPv4> – Displays information of the client identified by the <IPv4> parameter not <IPv4> – Inverts the match selection
ipv6 [<IPv6>\| not <Pv6>]	Optional. Displays wireless client information based on the IPv6 address passed <IPv6> – Displays information of the client identified by the <IPv6> parameter not <IPv6> – Inverts the match selection
filter state [data-ready\| not [data-ready\| roaming]\|roaming]	Optional. Filters wireless client information based on their state data-ready – Displays information of wireless clients in the data-ready state not [data-ready\|roaming] – Inverts match selection. Displays information of wireless clients neither ready nor roaming Roaming – Displays information of roaming clients
wlan [<WLAN-NAME>\| not <WLAN-NAME>]	Optional. Displays wireless client information based on the WLAN name passed <WLAN-NAME> – Specify the WLAN name. not <WLAN-NAME> – Inverts match selection

show wireless coverage-hole-incidents {detail} {filter [ap <MAC/HOSTNAME>|
client-mac <MAC>]|summary} {(on <DOMAIN-NAME>)}


wireless	Displays wireless configuration parameters. Use this option to view coverage-hole related incidents encountered by wireless clients and reported to associated access points.
coverage-hole-incidents	Displays coverage-hole related statistics
detail filters [ap <MAC/HOSTNAME>\| client-mac <MAC>]	Optional. Displays detailed coverage-hole related statistics filters – Optional. Displays detailed coverage-hole related statistics on a per access point or wireless-client basis ap <MAC/HOSTNAME> – Displays detailed coverage-hole related statistics for a specified access point <MAC/HOSTNAME> – Specify the access point‘s device name or MAC address. client-mac <MAC> – Displays detailed coverage-hole related statistics encountered by a specified wireless client <MAC> – Specify the wireless client‘s MAC address Note: If the command is executed without any parameters being included, the system displays all coverage-hole related statistics.
summary	Optional. Displays a summary of coverage-hole related statistics
on <DOMAIN-NAME>	This parameter is recursive and is common to the ‘detail‘ and ‘summary‘ keywords: on <DOMAIN-NAME> – Optional. Displays detailed or summary coverage-hole related statistics on a specified RF Domain <DOMAIN-NAME> – Specify the domain name.

show wireless location-server {on <AP-NAME>}


show wireless location-server on <AP-NAME>	Displays location server connection status on a specified access point <DEVICE-NAME> - Specify the AP name.

show wireless ml-rrm history


show wireless ml-rrm hsitory	Displays statistical data of changes made to the radio metrics through ml-rrm. If you have enabled ml-rrm (machine-learning radio resource management) on your radio, use this command to view the changes made the radio's channel, power, etc. settings through the ml-rrm agent.

show wireless meshpoint {config} {filter [device <DEVICE-NAME>|rf-domain <DOMAIN-NAME>]}


wireless	Displays wireless configuration parameters.
meshpoint	Displays meshpoint related information. Use this option to view detailed statistics on each Mesh-capable client available within controller‘s adopted access point‘s radio coverage area. A mesh network is where one where each node is able to communicate with other nodes and maintain more then one path to the other mesh nodes within the mesh network. A mesh network provides robust, reliable and redundant connectivity to all the members of the mesh network. When one member of the mesh network becomes unavailable, the other mesh nodes are still able to communicate with one another either directly or indirectly through intermediate nodes.
config	Optional. Displays all meshpoint configuration
filters [device <DEVICE-NAME>\| rf-domain <DOMAIN-NAME>]	Optional. Provides additional filter options, such as device name and RF Domain name. device <DEVICE-NAME> – Displays meshpoints applied to a specified device <DEVICE-NAME> – Specify the device name rf-domain <DOMAIN-NAME> – Displays meshpoints applied to a specified RF Domain <DOMAIN-NAME> – Specify the domain name

show wireless meshpoint {detail} {<MESHPOINT-NAME>}


wireless	Displays wireless configuration parameters
meshpoint	Displays meshpoint related information. Use this option to view detailed statistics on each Mesh-capable client available within controller‘s adopted access point‘s radio coverage area. A mesh network is where one where each node is able to communicate with other nodes and maintain more then one path to the other mesh nodes within the mesh network. A mesh network provides robust, reliable and redundant connectivity to all the members of the mesh network. When one member of the mesh network becomes unavailable, the other mesh nodes are still able to communicate with one another either directly or indirectly through intermediate nodes.
detail <MESHPOINT-NAME>	Optional. Displays detailed information for all meshpoints or a specified meshpoint <MESHPOINT-NAME> – Optional. Displays detailed information for a specified meshpoint. Specify the meshpoint name.

show wireless meshpoint {multicast|path|proxy|root|security|statistics} 
[<MESHPOINT-NAME>|detail] {on <DEVICE-OR-DOMAIN-NAME>}


wireless	Displays wireless configuration parameters
meshpoint	Displays meshpoint related information. Use this option to view detailed statistics on each Mesh-capable client available within controller‘s adopted access point‘s radio coverage area. A mesh network is where one where each node is able to communicate with other nodes and maintain more then one path to the other mesh nodes within the mesh network. A mesh network provides robust, reliable and redundant connectivity to all the members of the mesh network. When one member of the mesh network becomes unavailable, the other mesh nodes are still able to communicate with one another either directly or indirectly through intermediate nodes.
multicast	Optional. Displays meshpoint multicast information
path	Optional. Displays meshpoint path information
proxy	Optional. Displays meshpoint proxy information
root	Optional. Displays meshpoint root information
security	Optional. Displays meshpoint security information
statistics	Optional. Displays meshpoint statistics
[<MESHPOINT-NAME>\| detail]	The following keywords are common to all of the above parameters: <MESHPOINT-NAME> – Displays meshpoint related information for a specified meshpoint. Specify the meshpoint name. detail – Displays detailed multicast information for all meshpoints
on <DEVICE-OR-DOMAIN-NAME>	The following keyword is common to all of the above parameters: on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays detailed multicast information on a specified device or RF Domain. <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless meshpoint {neighbor} [<MESHPOINT-NAME>|detail|statistics {rf}] 
{on <DEVICE-OR-DOMAIN-NAME>}


wireless	Displays wireless configuration parameters
meshpoint	Displays meshpoint related information. Use this option to view detailed statistics on each Mesh-capable client available within controller‘s adopted access point‘s radio coverage area. A mesh network is where one where each node is able to communicate with other nodes and maintain more then one path to the other mesh nodes within the mesh network. A mesh network provides robust, reliable and redundant connectivity to all the members of the mesh network. When one member of the mesh network becomes unavailable, the other mesh nodes are still able to communicate with one another either directly or indirectly through intermediate nodes.
neighbor	Optional. Displays meshpoint neighbor information, based on the parameters passed
[<MESHPOINT-NAME>\| detail\|statistics {rf}]	Select one of the following parameter to view neighbor related information <MESHPOINT-NAME> – Displays detailed multicast information for a specified meshpoint. Specify the meshpoint name. detail – Displays detailed multicast information for all meshpoints statistics – Displays neighbors related statistics rf – Optional. Displays RF related statistics for neighbors
on <DEVICE-OR-DOMAIN- NAME>	The following keyword is common to all of the above parameters: on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays meshpoint neighbor information, based on the parameters passed, on a specified device or RF Domain. <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless meshpoint {tree} {on <DEVICE-OR-DOMAIN- NAME>}


wireless	Displays wireless configuration parameters
meshpoint	Displays meshpoint related information Note: The show > wireless > meshpoint > tree command can be executed only from a wireless controller.
tree	Optional. Displays meshpoint network tree
on <DEVICE-OR-DOMAIN-NAME>	Optional. Displays meshpoint network tree on a specified device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Optional. Specify the name of AP, wireless controller, service platform, or RF Domain

show wireless meshpoint {usage-mappings|on <DEVICE-OR-DOMAIN-NAME>}


wireless	Displays wireless configuration parameters
meshpoint	Displays meshpoint related information
usage-mappings	Optional. Lists all devices and profiles using the meshpoint
on <DEVICE-OR-DOMAIN- NAME>	Optional. Displays meshpoint applied to a specified device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Optional. Specify the name of AP, wireless controller, service platform, or RF Domain

show wireless mobility-database {on <DEVICE-OR-DOMAIN-NAME>}


wireless	Displays wireless configuration parameters
mobility-database	Displays controller-assisted mobility database
on <DEVICE-OR-DOMAIN-NAME>	The following keyword is recursive and common to the ‘filter <RADIO-MAC>‘ parameter: on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays detailed radio operation status for all or a specified radio on a specified device or RF Domain. <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless mint [client|detail] {portal-candidates {<DEVICE-NAME>|filter <RADIO-MAC>}|statistics} (on <DEVICE-OR-DOMAIN-NAME>)


wireless mint [client\|detail]	Displays radio MiNT-mesh related statistics client – Displays MiNT-mesh client related information. Use the ‘client‘ option to view detailed statistics on each Mesh capable client available within the selected access point‘s radio coverage area. detail – Displays detailed MiNT-mesh related information
portal-candidates	Displays detailed information about portal candidates for a MiNT-mesh. Mesh points connected to an external network and forwarding traffic in and out are Mesh portals. Mesh points must find paths to a portal to access the Internet. When multiple portals exist, the mesh point must select one. Use the additional filter option to view specific portal candidate details.
statistics	This option is common to the ‘client‘ and ‘detail‘ keyword. Displays MiNT-mesh client statistical data.
on <DEVICE-OR-DOMAIN-NAME>	This option is common to the ‘client‘ and ‘detail‘ keyword. Displays MiNT-mesh client related information on a specific device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the access point, controller, or RF Domain name.

show wireless mint portal statistics {on <DEVICE-OR-DOMAIN-NAME>}


wireless mint	Displays radio MiNT-mesh related statistics
links	Displays MiNT-mesh links related information. MiNT Links are automatically created between controllers and access points during adoption using MLCP (MiNT Link Creation Protocol). They can also be manually created between a controller and access point (or) between access points. MiNT links are manually created between controllers while configuring a cluster. Level 2 (or) remote MiNT links are controller aware links, and requires IP network for communication. This level 2 MiNT links at access points are intended for remote adaptive AP deployment and management from NOC. With Level2 MiNT links, access points are only aware of the controllers and not about other access points. Level 2 MiNT links also provide partitioning, between access points deployed at various remote sites.
on <DEVICE-OR-DOMAIN-NAME>	Displays MiNT-mesh links on a specific device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the access point, controller, or RF Domain name.

show wireless mint portal statistics {on <DEVICE-OR-DOMAIN-NAME>}


wireless mint	Displays radio MiNT-mesh related statistics
portal	Displays legacy client on MiNT-mesh portal
on <DEVICE-OR-DOMAIN-NAME>	Displays legacy client on MiNT-mesh portal on a specific device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the access point, controller, or RF Domain name.

show wireless radio {detail} {<DEVICE-NAME> {<1-3>|filter|on}}


wireless	Displays wireless configuration parameters
radio	Displays radio operation status and other related information. Use this option to view radio association data, including radio ID, connected APs, radio type, quality index and Signal to Noise Ratio (SNR). This data is reported to the managing controller or service platform from connected access point radios and should be refreshed periodically. A radio‘s RF Mode displays as: 2.4GHz-wlan – If it is configured to provide 2.4 GHz WLAN service 5GHz-wlan – If it is configured to provide 5.0 GHz WLAN service bridge – If it is configured to provide client-bridge operation
detail	Optional. Displays detailed radio operation status
<DEVICE-NAME>	Optional. Displays detailed information for a specified radio. Specify the MAC address or hostname, or append the interface number to form the radio ID in the AA-BB-CC-DD-EE-FF:RX or HOSTNAME:RX format.
<1-3>	Optional. Specify the radio interface index from 1 - 3 (if not specified as part of the radio ID)
filter <RADIO-MAC>	Optional. Provides additional filters <RADIO-MAC> – Optional. Filters based on the radio MAC address
on <DEVICE-OR-DOMAIN-NAME>	Optional. After specifying the radio MAC address, further refine the search by specifying a device or RF Domain. <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless radio {detail} {filter <RADIO-MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}


wireless	Displays wireless configuration parameters
radio	Displays radio operation status and other related information. Use this option to view radio association data, including radio ID, connected APs, radio type, quality index and SNR. This data is reported to the managing controller or service platform from connected access point radios and should be refreshed periodically. A radio‘s RF Mode displays as: 2.4GHz-wlan – If it is configured to provide 2.4 GHz WLAN service 5GHz-wlan – If it is configured to provide 5.0 GHz WLAN service bridge – If it is configured to provide client-bridge operation
detail	Optional. Displays detailed radio operation status
filter <RADIO-MAC>	Optional. Provides additional filter options <RADIO-MAC> – Uses MAC address to filter radios
on <DEVICE-OR-DOMAIN-NAME>	The following keyword is recursive and common to the ‘filter <RADIO-MAC>' parameter: on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays detailed radio operation status for all or a specified radio on a specified device or RF Domain. <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless radio {statistics} {on <DEVICE-OR-DOMAIN-NAME>|rf {on <DEVICE-OR-DOMAIN-NAME>}}


wireless	Displays wireless configuration parameters
radio	Displays radio operation status and other related information. Use this option to view radio association data, including radio ID, connected APs, radio type, quality index and SNR. This data is reported to the managing controller or service platform from connected access point radios and should be refreshed periodically. A radio‘s RF Mode displays as: 2.4GHz-wlan – If it is configured to provide 2.4 GHz WLAN service 5GHz-wlan – If it is configured to provide 5.0 GHz WLAN service bridge – If it is configured to provide client-bridge operation
statistics	Optional. Displays radio traffic and RF statistics
on <DEVICE-OR-DOMIAN- NAME>	Optional. Displays traffic and RF related statistics on a specified device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.
rf {on <DEVICE-OR-DOMAIN-NAME>}	Optional. Displays RF statistics on a specified device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless radio {statistics} {detail|window-data} {<DEVICE-NAME>} {<1-3>|filter <RADIO-MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}


wireless	Displays wireless configuration parameters
radio	Displays radio operation status and other related information. Use this option to view radio association data, including radio ID, connected APs, radio type, quality index and SNR. This data is reported to the managing controller or service platform from connected access point radios and should be refreshed periodically. A radio‘s RF Mode displays as: 2.4GHz-wlan – If it is configured to provide 2.4 GHz WLAN service 5GHz-wlan – If it is configured to provide 5.0 GHz WLAN service bridge – If it is configured to provide client-bridge operation
statistics {detail\|window-data}	Optional. Displays radio traffic and RF statistics. Use additional filters to view specific details. The options are: are: detail – Displays detailed traffic and RF statistics of all radios window-data – Displays historical data over a time window
<1-3>	Optional. Specify the radio interface index from 1- 3, if not specified as part of the radio ID using the preceding parameter.
filter <RADIO-MAC>	Optional. Provides additional filters <RADIO-MAC> – Optional. Filters based on the radio MAC address
on <DEVICE-OR-DOMAIN- NAME>	Optional. After specifying the radio MAC address, further refine the search by specifying a device or RF Domain. <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless radio {tspec} {<DEVICE-NAME>|filter|on <DEVICE-OR-DOMAIN-NAME>|option}


wireless	Displays wireless configuration parameters
radio	Displays radio operation status and other related information. Use this option to view radio association data, including radio ID, connected APs, radio type, quality index and SNR. This data is reported to the managing controller or service platform from connected access point radios and should be refreshed periodically. A radio‘s RF Mode displays as: 2.4GHz-wlan – If it is configured to provide 2.4 GHz WLAN service 5GHz-wlan – If it is configured to provide 5.0 GHz WLAN service bridge – If it is configured to provide client-bridge operation
tspec	Optional. Displays TSPEC information on a radio
<DEVICE-NAME>	Optional. Specify the MAC address or hostname, or append the interface number to form the radio ID in the AA-BB-CC-DD-EE-FF:RX or HOSTNAME:RX format.
filter	Optional. Provides additional filters <RADIO-MAC> – Optional. Filters based on the radio MAC address
on <DEVICE-OR-DOMAIN- NAME>	Optional. After specifying the radio MAC address, further refine the search by specifying a device or RF Domain. <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless regulatory [channel-info <WORD>|county-code <WORD>]


wireless	Displays wireless configuration parameters
regulatory	Displays wireless regulatory information
channel-info <WORD>	Displays channel information <WORD> – Specify the channel number.
country-code <WORD>	Displays country code to country name information <WORD> – Specify the two letter ISO-3166 country code.

show wireless regulatory device-type [ap505|ap510] <WORD>


wireless	Displays wireless configuration parameters
regulatory	Displays wireless regulatory information
device-type <DEVICE-TYPE> <WORD>	Displays wireless regulatory information based on the device type selected. Select the device type. The options are: AP505, AP510 After specifying the device type, specify the country code. <WORD> – Specify the two letter ISO-3166 country code.

show wireless rf-domain statistics {detail} {(on <DEVICE-OR-DOMAIN-NAME>)}


wireless	Displays wireless configuration parameters
rf-domain statistics	Displays RF Domain statistics
details	Optional. Displays detailed RF Domain statistics
on <DEVICE-OR-DOMAIN-NAME>	The following keyword is recursive and common to the ‘detail‘ parameter: on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays RF Domain statistics on a specified device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless sensor-server {on <DEVICE-OR-DOMAIN-NAME>}


wireless	Displays wireless configuration parameters
sensor- server {on <DEVICE-OR-DOMAIN- NAME>}	Displays AirDefense sensor server configuration details on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays AirDefense sensor server configuration on a specified device or RF Domain

show wireless unsanctioned aps {detailed|statistics} {(on <DEVICE-OR-DOMAIN-NAME>)}


wireless	Displays wireless configuration parameters
unsanctioned aps	Displays unauthorized APs. Use additional filters to view specific details.
detailed	Optional. Displays detailed unauthorized APs information
statistics	Optional. Displays channel statistics
on <DEVICE-OR-DOMAIN- NAME>	The following keyword is common to the ‘detailed' and ‘statistics' parameters: on <DEVICE-OR-DOMAIN-NAME> – Optional. Specify the name of the AP, wireless controller, service platform, or RF Domain. <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wireless wips [client-blacklist|event-history] {on <DEVICE-OR-DOMAIN-NAME>}


wireless	Displays wireless configuration parameters
wips [client-blacklist\|event- history]	Displays the WIPS details client-blacklist – Displays blacklisted clients event-history – Displays event history
on <DEVICE-OR-DOMAIN-NAME>	The following keyword is common to the ‘client-blacklist' and ‘event-history' parameters: on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays the WIPS details on a specified device or RF Domain. <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

show wlan {detail <WLAN>|on <DEVICE-OR-DOMAIN-NAME>|policy-mappings|usage-mappings}


wireless	Displays wireless configuration parameters
wlan	Displays WLAN related information based on the parameters passed
detail <WLAN>	Optional. Displays WLAN configuration <WLAN> – Specify the WLAN name.
on <DEVICE-OR-DOMAIN-NAME>	Optional. Displays WLAN configuration on a specified device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.
policy-mappings	Optional. Displays WLAN policy mappings
usage-mappings	Optional. Lists all devices and profiles using the WLAN

show wlan {config filter {device <DEVICE-NAME>|rf-domain <DOMAIN-NAME>}}


wireless	Displays wireless configuration parameters
wlan	Displays WLAN related information based on the parameters passed
config filter	Optional. Filters WLAN information based on the device name or RF Domain
device <DEVICE-NAME>	Optional. Filters WLAN information based on the device name <DEVICE-NAME> – Specify the device name.
rf-domain <DOMAIN-NAME>	Optional. Filters WLAN information based on the RF Domain <DOMAIN-NAME> – Specify the RF Domain name.

show wlan {detail <WLAN>|on <DEVICE-OR-DOMAIN-NAME>|policy-mappings|usage-mappings}


wireless	Displays wireless configuration parameters
wlan	Displays WLAN related information based on the parameters passed
detail <WLAN>	Optional. Displays WLAN configuration <WLAN> – Specify the WLAN name.
on <DEVICE-OR-DOMAIN-NAME>	Optional. Displays WLAN configuration on a specified device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.
policy-mappings	Optional. Displays WLAN policy mappings
usage-mappings	Optional. Lists all devices and profiles using the WLAN

show wlan {config filter {device <DEVICE-NAME>|rf-domain <DOMAIN-NAME>}}


wireless	Displays wireless configuration parameters
wlan	Displays WLAN related information based on the parameters passed
config filter	Optional. Filters WLAN information based on the device name or RF Domain
device <DEVICE-NAME>	Optional. Filters WLAN information based on the device name <DEVICE-NAME> – Specify the device name.
rf-domain <DOMAIN-NAME>	Optional. Filters WLAN information based on the RF Domain <DOMAIN-NAME> – Specify the RF Domain name.

show wlan {statistics {<WLAN>|detail} {(on <DEVICE-OR-DOMAIN-NAME>)}


wireless	Displays wireless configuration parameters
wlan	Displays WLAN related information based on the parameters passed
statistics {<WLAN>\|detail}	Optional. Displays WLAN statistics. Use additional filters to view specific details <WLAN> – Optional. Displays WLAN statistics. Specify the WLAN name. detail – Optional. Displays detailed WLAN statistics
on <DEVICE-OR-DOMAIN-NAME>	The following keyword is common to the ‘WLAN‘ and ‘detail‘ parameters: on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays WLAN statistics on a specified device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

Examples

nx9500-6C8809(config)#show wireless wlan config
--------------------------------------------------------------------------------
  NAME   ENABLE   SSID   ENCRYPTION   AUTHENTICATION   VLAN     BRIDGING MODE
--------------------------------------------------------------------------------
  test   Y        test   wep64        none             1      local
--------------------------------------------------------------------------------
nx9500-6C8809(config)#

nx9500-6C8809(config)#show wireless wips client-blacklist
No wireless clients blacklisted
nx9500-6C8809(config)#

nx9500-6C8809(config)#show wireless regulatory country-code
--------------------------------------------------------------------------------
            ISO CODE                                  NAME
--------------------------------------------------------------------------------
  gt                             Guatemala
  co                             Colombia
  cn                             China
  cm                             Cameroon
  cl                             Chile

--More--
nx9500-6C8809(config)#

nx9500-6C8809#show wireless regulatory device-type ap505 us
----------------------------------------------------------------------------------------------------
  #  Channel Set Power(mW) Power (dBm)    Placement          DFS       CAC(mins)        TPC
----------------------------------------------------------------------------------------------------
  1   1-11        4000      36          Indoor/Outdoor   NA             NA        NA
  2   36-48       4000      36          Indoor/Outdoor   Not Required   0         Not Required
  3   52-64       1000      30          Indoor/Outdoor   Required       1         Required
  4   52-64       500       27          Indoor/Outdoor   Required       1         Not Required
  5   100-140     1000      30          Indoor/Outdoor   Required       1         Required
  6   100-140     500       27          Indoor/Outdoor   Required       1         Not Required
  7   149-165     4000      36          Indoor/Outdoor   Not Required   0         Not Required
----------------------------------------------------------------------------------------------------
nx9500-6C8809#

nx9600-7F5124#show wireless meshpoint tree on PTP-AP
In progress .......
1:PTP-Radio2 [7 MPs(2 roots, 5 bound)]
|-ap7562-84A484-ROOT1
| |-ap7562-84A2CC-VMM
| |-ap7532-80C28C-NR
| |-ap7532-82CCA4-NR
| |-ap7562-84A22C-NR2
| |-ap7532-160114
|-ap7562-84A280-ROOT2

Total number of meshes displayed: 1
nx9600-7F5124#

rfs4000-22A24E#show wireless client
-----------------------------------------------------------------------------------------------------------------
Report start on RF-Domain: qs1
MAC                         IP    VENDOR             RADIO-ID             WLAN                 VLAN     STATE 
-----------------------------------------------------------------------------------------------------------------
Report end on RF-Domain: qs1
-----------------------------------------------------------------------------------------------------------------

-----------------------------------------------------------------------------------------------------------------
Report start on RF-Domain: Store-1
MAC                         IP    VENDOR             RADIO-ID             WLAN                 VLAN         STATE 
-----------------------------------------------------------------------------------------------------------------
00-01-02-03-04-10        2.3.4.16 3Com Corp          00-01-02-03-04-00:R1 sim-wlan-1           1       Data-Ready 
00-01-02-03-05-10        2.3.5.16 3Com Corp          00-01-02-03-04-00:R2 sim-wlan-1           1       Data-Ready 
Report end on RF-Domain: Store-1
-----------------------------------------------------------------------------------------------------------------

-----------------------------------------------------------------------------------------------------------------
Report start on RF-Domain: default
  database not available
Report end on RF-Domain: default
-----------------------------------------------------------------------------------------------------------------

Total number of clients displayed: 2
rfs4000-22A24E#

NX9500(config)#show wireless bridge hosts
-----------------------------------------------------------------------------
HOST MAC             BRIDGE MAC         IP             BRIDGING STATUS ACTIVITY
                                                                   (sec ago)
-----------------------------------------------------------------------------
FC-0A-81-16-75-98    FC-0A-81-16-69-50 172.16.34.55    UP           00:00:00
-----------------------------------------------------------------------------
Total number of hosts displayed: 1
NX9500(config)#

NX9500(config)#show wireless bridge statistics
---------------------------------------------------------------------------------------
LOCAL RADIO           CONNECTED AP     SIGNAL   SNR TX-RATE RX-RATE     Tx      Rx  RETRY
                                       (dbm)    db  (Mbps)  (Mbps)     bps     bps   AVG
---------------------------------------------------------------------------------------
ap6562-167598:R2     B4-C7-99-CA-A1-F0   -52    50      53      36     1 k     3 k    10
---------------------------------------------------------------------------------------
Total number of radios displayed: 1
NX9500(config)#

The following example shows the location-server status as online:

vx9000-739FF8#show wireless location-server on ap7532-1600B0
--------------------------------------------------------------------------------
  #              LOCATION SERVER HOST            PORT         STATUS
--------------------------------------------------------------------------------
  1          testws.extremelocation.com          443          ONLINE
--------------------------------------------------------------------------------
vx9000-739FF8#

If the location-server IP address/hostname is not configured in the AP's RF-Domain, then the status displays as "no server defined" as shown in the following example:

vx9000-739FF8(config)#show wireless location-server on ap7612-3B363D
--------------------------------------------------------------------------------
  #          LOCATION SERVER HOST        PORT               STATUS
--------------------------------------------------------------------------------
  1                                      0           no server defined
--------------------------------------------------------------------------------
vx9000-739FF8(config)#

The following example displays ml-rrm driven radio metric changes:

ap7632-9AECE1#show wireless ml-rrm history
--------------------------------------------------------------------------------------------------------------------------------
            TIME                     EVENT                                          DESCRIPTION
--------------------------------------------------------------------------------------------------------------------------------
Thu Feb 28 20:03:43 2019  Mangement Rate            Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) mgmt rate is set to 30
Thu Feb 28 20:03:43 2019  Probe Response Threshold  Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) probe is set to -20
Thu Feb 28 20:03:43 2019  Cell Size                 Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) cell size is set to -10
Thu Feb 28 20:03:43 2019  Mangement Rate            Radio ap7632-9AECE1:R1 (D8-84-66-9A-DA-00) mgmt rate is set to 30
Thu Feb 28 20:03:43 2019  Probe Response Threshold  Radio ap7632-9AECE1:R1 (D8-84-66-9A-DA-00) probe is set to -20
Thu Feb 28 20:03:43 2019  Cell Size                 Radio ap7632-9AECE1:R1 (D8-84-66-9A-DA-00) cell size is set to -10
Thu Feb 28 20:02:02 2019  Mangement Rate            Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) mgmt rate is set to 30
Thu Feb 28 20:02:02 2019  Probe Response Threshold  Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) probe is set to -20
Thu Feb 28 20:02:02 2019  Cell Size                 Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) cell size is set to -10
Thu Feb 28 20:02:02 2019  Mangement Rate            Radio ap7632-9AECE1:R1 (D8-84-66-9A-DA-00) mgmt rate is set to 30
Thu Feb 28 20:02:02 2019  Probe Response Threshold  Radio ap7632-9AECE1:R1 (D8-84-66-9A-DA-00) probe is set to -20
Thu Feb 28 20:02:02 2019  Cell Size                 Radio ap7632-9AECE1:R1 (D8-84-66-9A-DA-00) cell size is set to -10
Thu Feb 28 20:01:57 2019  Channel Change            Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) channel changed from 36 to 52w
Thu Feb 28 20:01:57 2019  Power Adjustment          Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) power changed from 20 to 12
Thu Feb 28 20:01:57 2019  Mangement Rate            Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) mgmt rate is set to 30
Thu Feb 28 20:01:57 2019  Probe Response Threshold  Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) probe is set to -20
Thu Feb 28 20:01:57 2019  Cell Size                 Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) cell size is set to -10
Thu Feb 28 20:01:52 2019  Channel Change            Radio ap7632-9AECE1:R1 (D8-84-66-9A-DA-00) channel changed from 1 to 6w
Thu Feb 28 20:01:52 2019  Power Adjustment          Radio ap7632-9AECE1:R1 (D8-84-66-9A-DA-00) power changed from 23 to 18
Thu Feb 28 20:01:52 2019  Mangement Rate            Radio ap7632-9AECE1:R1 (D8-84-66-9A-DA-00) mgmt rate is set to 30
--------------------------------------------------------------------------------------------------------------------------------
ap7632-9AECE1#