client-identity-group

Configures a new client identity group

A client identity group is a collection of client identities. Each client identity included in a client identity group is set a priority value that indicates the priority for that identity when device fingerprinting.

Device fingerprinting relies on specific information sent by a wireless client when acquiring IP address and other configuration information from a DHCP server. The feature uses the DHCP options sent by the wireless client in the DHCP request or discover packets to derive a unique signature specific to the class of devices. For example, Apple devices have a different signature than Android devices. This unique signature can then be used to classify the devices and assign permissions and restrictions on each device class.

A client identity group can be attached to a profile or device, enabling device fingerprinting on them.

Supported on the following devices:

Syntax

client-identity-group <CLIENT-IDENTITY-GROUP-NAME>

Parameters

client-identity-group <CLIENT-IDENTITY-GROUP-NAME>

client-identity-group <CLIENT-IDENTITY-GROUP-NAME>

Creates a new client identity group and enters its configuration mode

  • <CLIENT-IDENTITY-GROUP-NAME> – Specify a client identity group name. If the group does not exist, it is created.

Examples

nx9500-6C8809(config)#client-identity-group test
nx9500-6C8809(config-client-identity-group-test)#
Client Identity group Mode commands:
  client-identity  Client identity (DHCP Device Fingerprinting)
  load             Load Client identity Fingerprints
  no               Negate a command or set its defaults

  clrscr           Clears the display screen
  commit           Commit all changes made in this session
  do               Run commands from Exec mode
  end              End current mode and change to EXEC mode
  exit             End current mode and down to previous mode
  help             Description of the interactive help system
  revert           Revert changes
  service          Service Commands
  show             Show running system information
  write            Write running configuration to memory or terminal

nx9500-6C8809(config-client-identity-group-test)#

Related Commands

no

Removes an existing client identity group