AP310i/e Specifications

AP310i/e is a dual-radio indoor model 802.11ax access point. The “i” in AP310i indicates that the access point comes with internal antennas, and the “e” indicates that it comes with external antenna connectors. The access point features one built-in dual-band radio and one band-locked radio, four WiFi internal or external antennas, and one Bluetooth Low Energy (BLE) antenna.

Note

The AP310i/e requires a minimum base firmware of WiNG 7.3.1.

Two 802.11ax radios (one 2×2 2.4 GHz and 5 GHz radio, and one 2×2 5 GHz radio)
One 2.4 GHz IoT radio
Console Port: RJ45
Two Ethernet Ports:
- GE1 - 10/100/1000/2500/5000 Mbps auto-negotiation Ethernet port, RJ45, with Power over Ethernet (PoE) In
- GE2 - One multi-rate GE/2.5 GE Ethernet port
LED indicators: Six
All LED indicators will be powered on during reset.
One Reset button
One Kensington lock
One safety hanger provision
One USB 2.0 type A connector
Power: PoE 802.3at
Antennas:
- AP310i: Four WiFi internal antennas and one BLE internal antenna
- AP310e: Four RP-SMA external antenna ports and one BLE RP-SMA antenna