Methods for Configuring a VNS

To configure a VNS, you can use one of the following methods:

• Manual configuration — Allows you to create a new VNS by first configuring the topology, role, and WLAN (Wireless Local Area Network) services and then configuring any remaining individual VNS tabs that are necessary to complete the process.

  When configuring a VNS, you can navigate between the various VNS tabs and define your configuration without having to save your changes on each individual tab. After your VNS configuration is complete, click Save on any VNS tab to save your completed VNS configuration.

  

  Note

  If you navigate away from the VNS configuration tabs without saving your VNS changes, your VNS configuration changes will be lost.
• Wizard configuration — The VNS wizard helps create and configure a new VNS by prompting you for a minimum amount of configuration information. The VNS is created using minimum parameters. The remaining parameters are automatically assigned in accordance with best practice standards.

  After the VNS wizard completes the VNS creation process, you can then edit or revise any of the VNS configuration to suit your network needs.