Enabling and Disabling a VNS

By default, when a new VNS is created, the VNS is added to the system as an enabled VNS. A VNS can be enabled or disabled. Disabling a VNS provides the ability to temporarily stop wireless service on a VNS. The disabled VNS configuration remains in the database for future use.

The controller can support the following VNSs:

ExtremeWireless Appliance Active and Defined VNS Support

Platform	Active VNSs	Defined VNSs
C5110	128	256
C5210	128	256
C4110	64	128
C25	16	32
C35	16	32
V2110 (Small)	16	32
V2110 (Medium)	64	128
V2110 (Large)	128	256

To enable or disable a VNS:

1. From the top menu, click VNS.
2. In the left pane, expand the Virtual Networks pane and select the VNS to enable or disable.
3. On the Core tab, in the Status box, select or de-select the Enable checkbox.
4. Click Save. The VNS is enabled or disabled accordingly.