Configuring the Default Wireless AP Settings

Wireless APs are added with default settings. You can modify the system‘s AP default settings, and then use these default settings to configure newly added APs. In addition, you can base the AP default settings on an existing AP configuration or you can make pre-configured APs inherit the properties of the default AP configuration when they register with the system.

Each AP model has its own tab:

• Common Configuration — Configure common configuration, such as WLAN (Wireless Local Area Network) assignments and static configuration options for all APs. See Configuring Common Configuration Default AP Settings.
• AP37xx W78xC— Configure the default settings for the Radar series APs. See Configuring AP37xx, W78xC Default AP Settings.
• AP38xx— Configure the default settings for the ExtremeWireless Radar series APs. See Configuring AP38xx Default AP Settings.
• AP3801— Configure the default settings for the ExtremeWireless Radar series APs. See Configuring AP3801 Default AP Settings.
• AP3805— Configure the default settings for the ExtremeWireless Radar series APs. See Configuring AP3805 Default AP Settings.
• AP3935 — Configure the default settings for the ExtremeWireless indoor series AP. See Configuring AP3935 Default AP Settings
• AP3965 — Configure the default settings for the ExtremeWireless outdoor series AP. See Configuring AP3965 Default AP Settings
• AP3912 — Configure the default settings for the ExtremeWireless wall plate AP. See Configuring AP3912 Default AP Settings.
• AP3916ic — Configure the default settings for the ExtremeWireless Integrated Camera AP. See Configuring AP3916 Default AP Settings.