AP Dashboard

ExtremeWireless offers a dashboard of statistical information for each AP in the network. The following information is displayed for each AP:

• IP address. Supports both IPv4 and IPv6 addresses.
• IoT MAC. Mac address for the Internet of Things enablement. Displays for AP3912 and AP3916 when IoT is enabled.
• Model Number
• Software version running on the AP
• Country
• AP Role
• Number of 802.3 clients (AP3912)
• Camera IP (AP3916)
• Number of radios
• Channel number if applicable
• Channel Mode
• Power level

The AP3912 and AP3916ic offer integrated BLE/802.15.4 radios for connectivity to Internet of Things (IoT) sensors and devices.

AP properties for these access points display the IoT MAC address and channel and the TX Power Level for the BLE radio when the IoT is enabled.

Clients

Displays the number of clients on each radio in 10-minute intervals. Use this information to gain visibility over time into AP utilization per radio. Details for the AP3912 and AP3916 show the number of 802.3 clients. These are clients that utilize the wired client ports that are available on these AP models.

Devices by Type

Offers visibility into the type of devices connected to your network by percentage. Use this information to understand the BYOD usage on your network.

Noise (dBm)

Tracks the noise level for each AP radio in 10-minute intervals. Use this information to understand channel performance over time.

Channel Utilization (%)

Tracks the percentage of traffic on each radio. Use this information to understand channel usage over time, in 10-minute intervals.

Click Configure to display configuration options for the AP. For more information, see AP Properties Tab Configuration.