Radio Actions

Take the following actions from the Radio Actions button for the appropriate radio.
Click to expand in new window
Radio 1 Actions
Graphics/radio1_actions.png
Click to expand in new window
Radio 2 Actions button
Graphics/radio2_actions.png
Click to expand in new window

Radio Actions

Field Description
Set Tx Power

Apply this command to selected APs. All selected APs must be the same model and licensed for the same country. Configure the setting from the resulting dialog.

First, configure the selected APs to the same radio mode and same channel width before setting Tx Power here. When selected AP‘s are configured for the same width/mode, the Set Tx Power dialog displays the width/mode and you are able to set the Tx power and channel. For more information, see Configuration Parameters for Radio Properties.

Auto Channel Select Apply this command to selected APs. For more information about ACS, see Dynamic Radio Management (DRM).
Set Radio Mode

Apply this command to selected APs. All selected APs must be the same model and licensed for the same country. Configure the setting from the resulting dialog.

For more information, see Configuration Parameters for Radio Properties.

Set Channel Width

Apply this command to selected APs. All selected APs must be the same model and licensed for the same country. Configure the setting from the resulting dialog.

For more information, see Configuration Parameters for Radio Properties.