Configuring Common Configuration Default AP Settings

1. From the top menu, click AP.
2. In the left pane, click Global > Default Settings.
   The Common Configuration tab is displayed.

   

   

   

   Note

   Ports 1, 2, and 3, are available on the AP3912. Port 1 is the port that corresponds to the Camera (CAM) function of the AP3916ic.
3. In the Static Configuration section, you can specify an EWC search list or use the search list provided from the AP. Do one of the following:
   Check Learn EWC Search List from AP to accept the AP's search list, or clear the checkbox to specify a common search list for all APs. For more information about creating an EWC Search List, see Static Configuration Properties.
4. In the WLAN Assignments section, you can associate a WLAN (Wireless Local Area Network) assignment to a radio.
   • If the controller is in an availability pair, you can apply default WLAN assignments to foreign APs, by selecting the Apply default WLAN assignments to foreign APs checkbox. For more information, see Availability.
   • To associate a WLAN Service in the list to a radio and or a wired port, select the checkbox matching the radio and or port for the selected WLAN.
     • A WLAN service can be assigned to one or more radios and ports. A client port can be assigned to only one WLAN service. The assignment enables the port.
     • Wireless and wired users associated to the same WLAN service and receive identical service. They are affected by the same policies and filters.
     • AP3912 wired port assignments are limited to open WLAN services, MBA, and captive portal.
5. Click Save Settings.